What is chamber filter press?

The Chamber filter press is a filtration equipment which widely used for solid-liquid separation.

It consists of a frame, filter plate, hydraulic system, and control system.

1)Frame is made of high-quality Q345 carbon steel with sandblasting processing, it can be coated with SS304 or 316L for meeting high requirements like food grade, corrosion resistance etc.

2)Hydraulic system is equipped with famous brand motor, the power voltage can be customized as per customer's requirement from different countries, the closing pressure can reach 20-25MPa.

3)Control system uses PLC to realize automatic operation includes clamping, feeding, plate opening, plate shaking, cloth cleaning, cake discharging etc.

4)Schneider Electric components can work for many years. Stainless steel track for plate shifter is wearable, it has long service life.5)Customized model, capacity and products are available

                  What can it be used for?

The products are simple in structure but good in separating effects, convenient in use ,and widely applicable to coal washing, inorganic salt, mining alcohol, petroleum,chemical, dyestuff, metallurgy,  medicine, foodstuff, textile,printing, paper making, and sewage treatment and industrious.

            Reasons to choose our filter press

1.Automatic plate-pulling,controlled by electrical equipment or micro computer.

2.Hydraulic installation as driving devices for compression enlightening filter plates, pulling filter plates, The adoption of pressure meter for automatic operation of automatic regulating pressure, compression,going backward,pulling plate and so on.

3.Easy to run, safe and labor-saving. Push-buttons in the controlling board can make continuous operation of the filter plates.And a variety of safety installations are equipped with this model to ensure operator safety and good performance of the filter press.

4.Other special filter press automatic functions also can be added such as filter cloth washing system, filtrate collecting system, filter cloth shaking system, drip tray system etc.

 Which type do you need?

     If you want to the most suitable filter press, you need to know much more information. Do you know how filter press works? Do you the structure of the filter press? No ? it’s ok. The following parts are what you want to know.Filter press consists of frame, filter plate, pressing system (manual, mechanical or hydraulic) and electric control cabinet.Frame consists of base, push plate, tail plate and girder and supports the pressing device and filter plates.Filter plates are installed on girder between tail plate and push plate, with filter cloth sandwiched in them.  

   In operation, the pressing device(cylinder piston rod or screw drives the push plate to press the filter plates and filter cloth between push plate and tail plate.Filter chambers are formed between pressed filter plates and materials get into The filter chambers through the feeding port in tail plate.Solid particles are trapped in filter chambers form into  cakes,while liquid is discharged out of the machine through press cake and filter cloth. To wash the press cakes,washing water can be  introduced through the washing port in the tail Plate. In similar manner, to drying the press cakes, compressed air can be introduced through the washing port.

      I do believe the picture will help you understand the operating process of filter press better. You can image and simulate the operation in your brain. And then you can choose the one suitable for your demand.You can refer to the data in the table. Our company has various models of filter presses, there is always one that is suitable for you.