Everyone knows that coal is a non-renewable resource, so it is necessary to make full use of the limited coal. At this time, the chamber filter press plays a great role. As a solid-liquid separation equipment, the chamber filter press can recycle coal slime, thereby improving the utilization rate of coal and improving the efficiency of the enterprise. Therefore, the chamber filter press is a very important equipment for major coal preparation plants.

The chamber filter press achieves the effect of recovering peat by filtering and dehydrating the peat water. It is a necessary equipment for the closed-loop circulation of water washing in the coal preparation plant and is also an effective method for recovering coal slime. The chamber filter press is used to separate solids and liquids. Compared with other solid-liquid separation equipment, the mud cake filtered by the chamber filter press has a higher solid content and excellent separation effect. The basic principle of solid-liquid separation is: the mixed liquid flows through the filter cloth, the solids stay on the filter cloth, and gradually accumulate on the filter cloth to form a filter cake. The filtrate part penetrates the filter cloth and becomes a clear liquid without solids. Equipment inspection should be carried out during the work process. During the operation of the chamber filter press, it is necessary to check the operating status of each link of the machine in time to see if the parts are damaged. If any abnormality is found, the maintenance personnel should be notified for investigation and repair.

After the user has used the chamber filter press for some time, in order to ensure the normal operation of the chamber filter press and extend its service life, correct use and operation are crucial. It is recommended to conduct a comprehensive inspection of the entire machine before each shift: the mechanical pressing transmission parts and the reduction box must be filled with sufficient lubricating oil; the hydraulic pressing oil tank storage volume and the working pressure of the hydraulic station should be checked. The hydraulic oil is generally replaced once a year, and the hydraulic system should be fully cleaned when replacing it.